Organic Chemicals

• Chemical Name: Propylene (Propene)
• Chemical Formula: C₃H₆
• CAS Number: 115-07-1
• Molecular Weight: 42.08 g/mol
• Appearance: Colorless gas or liquefied under pressure
• Odor: Mild, gasoline-like odor
• Purity: 99% minimum (industrial grade; can vary for polymer-grade)
• Density: 0.584 g/cm³ (liquid at –47.6 °C)
• Boiling Point: –47.6 °C
• Melting Point: –185 °C
• Flash Point: –108 °C (gas)
• Applications: Production of polypropylene, acetone, propylene oxide, and other chemicals; used in plastics, fibers, and resins
• Storage Conditions: Store in a cool, ventilated area away from heat, sparks, and flames;

• Chemical Name: Ammonia
• Chemical Formula: NH₃
• CAS Number: 7664-41-7
• Molecular Weight: 17.03 g/mol
• Appearance: Colorless gas or liquefied under pressure
• Odor: Pungent, characteristic smell
• Purity: 99% minimum (industrial grade; technical grade may vary)
• Density: 0.73 kg/m³ (gas at 0 °C, 1 atm)
• Boiling Point: –33.34 °C
• Melting Point: –77.73 °C
• Flash Point: Not applicable (gas); flammable in air at certain concentrations
• Applications: Fertilizer production (urea, ammonium nitrate), chemical synthesis, refrigeration, cleaning agents, and industrial processes
• Storage Conditions: Store in a cool, dry, well-ventilated area; 

• Chemical Name: Phosphoric Acid
• Chemical Formula: H₃PO₄
• CAS Number: 7664-38-2
• Molecular Weight: 98 g/mol
• Appearance: Colorless to slightly yellow, viscous liquid
• Odor: Odorless
• Purity: 85% minimum (commercial grade; higher purity available for food/technical grade)
• Density: 1.685 g/cm³ (85% solution at 25 °C)
• Boiling Point: 158 °C (for 85% solution)
• Melting Point: 42 °C (solid)
• pH: ~1.5 (for 1% solution)
• Applications: Fertilizer production (mono-ammonium phosphate, diammonium phosphate), food additive (acidulant), rust removal, 
• Storage Conditions: Store in a cool, dry, well-ventilated area; 

• Chemical Name: Sodium Hydroxide
  Chemical Formula: NaOH
  CAS Number: 1310-73-2
• Appearance: White, odorless, solid (flakes, pellets, or granules)
• Form: Flakes, pellets, beads, or solution (50% w/w)
• Molecular Weight: 39.997 g/mol
• Density: 2.13 g/cm³ (solid)
• Melting Point: 318 °C (604 °F)
• Boiling Point: 1,388 °C (2,530 °F)
• Solubility: Highly soluble in water, exothermic reaction
• pH (1% solution): ~13–14

• Purity (NaOH): ≥ 98% (industrial grade)

Packaging:

• 25 kg, 50 kg, or 1,000 kg bags (solid)

Applications:

• Water treatment
• Soap and detergent manufacturing
• Paper and pulp industry
• Chemical synthesis (e.g., glycerin, biodiesel)
• pH adjustment in various processes

Safety Information:

• Highly corrosive; causes severe burns.
• Use proper PPE: gloves, goggles, protective clothing.
• Store in a cool, dry, ventilated area, away from acids.

• Chemical Name: Polyethylene Oxide
• Abbreviation: PEO
• Chemical Formula: (C₂H₄O)ₙ
• CAS Number: 25322-68-3
• Appearance: White to off-white powder or granules
• Odor: Odorless
• Molecular Weight: 100,000 – 5,000,000 g/mol (depending on grade)
• Purity: ≥ 99% (depending on industrial or pharmaceutical grade)
• Solubility: Soluble in water and polar solvents; insoluble in non-polar solvents
• pH: Neutral to slightly basic in aqueous solution
• Applications: Used as a thickening agent, binder, lubricant, dispersant, and in pharmaceuticals, cosmetics, coatings, and industrial processes
• Storage Conditions: Store in a cool, dry, and well-ventilated area; keep container tightly closed to avoid moisture
• Additional Features: Non-toxic, biodegradable, chemically stable, and compatible with many formulations

• Chemical Name: Benzoic Acid Sodium Salt
• Other Names: Sodium Benzoate
• Chemical Formula: C₆H₅COONa
• CAS Number: 532-32-1
• Appearance: White crystalline powder
• Odor: Odorless or slightly aromatic
• Purity: ≥ 99%
• Moisture Content: Max. 1%
• pH (1% Solution): 7–9
• Solubility: Soluble in water; practically insoluble in alcohol
• Melting Point: 300 °C (decomposes)
• Applications: Food and beverage preservative, cosmetics, pharmaceuticals, and chemical industry
• Packaging: 25 kg bags or as per customer requirement
• Storage Conditions: Store in a cool, dry, ventilated area away from strong acids, oxidizers, and heat
• Additional Features: Non-toxic, food-grade, widely used for preservation and stability of products

Chemical Name: Benzyl Alcohol
CAS Number: 100-51-6
Molecular Weight: 108.14 g/mol

Physical Properties:

• Appearance: Colorless to pale yellow liquid
• Odor: Mild, pleasant aromatic odor
• Density: 1.044 g/cm³ at 20 °C
• Boiling Point: 205–206 °C
• Melting Point: -15 °C
• Flash Point: 93 °C (closed cup)
• Solubility: Miscible with water (approx. 40 g/100 mL at 20 °C), soluble in most organic solvents
• Refractive Index: 1.539–1.541

Purity 

• Purity (GC or HPLC): ≥ 99% (industrial/technical grade)

Packaging:

• 25 kg, 50 kg, or 200 kg HDPE drums
• Bulk liquid in ISO tanks (for industrial orders)

Applications:

• Solvent for paints, coatings, and inks
• Preservative in cosmetics and pharmaceuticals
• Raw material in chemical synthesis (e.g., esters, benzyl derivatives)
• Flavor and fragrance industry

Safety Information:

• Harmful if swallowed or inhaled in large amounts
• Avoid contact with eyes and skin
• Store in a cool, dry, ventilated area away from strong oxidizers

Chemical Name: Sodium Formate
CAS Number: 141-53-7
Molecular Weight: 68.01 g/mol

Physical Properties:

• Appearance: White crystalline powder or granules
• Odor: Odorless
• Density: 1.769 g/cm³
• Melting Point: 253 °C (decomposes)
• Solubility: Soluble in water (97 g/100 mL at 20 °C), insoluble in ethanol
• pH (10% solution): 7–9

Purity 

• Purity (NaCOOH): ≥ 95% (industrial grade)

Packaging:

• 25 kg, 50 kg, or 1,000 kg bags
• Bulk packaging in jumbo bags or ISO tanks (for liquid solutions)

Applications:

• De-icing agent and road salt alternative
• Leather tanning industry
• Textile finishing
• Chemical intermediate for formic acid production
• pH buffer and neutralizing agent

Safety Information:

• Low toxicity but avoid inhalation of dust
• Store in a cool, dry place away from acids and moisture

Sodium Benzoate Specifications

• Chemical Name: Sodium Benzoate
• Other Names: Benzoic Acid Sodium Salt
• Chemical Formula: C₆H₅COONa
• CAS Number: 532-32-1
• Appearance: White crystalline powder
• Odor: Odorless or slightly aromatic
• Purity: ≥ 99%
• Moisture Content: Max. 1%
• pH (1% Solution): 7–9
• Solubility: Soluble in water; practically insoluble in alcohol
• Melting Point: 300 °C (decomposes)
• Applications: Food preservative, beverage preservative, cosmetics, pharmaceuticals, and chemical industry
• Packaging: 25 kg bags or as per customer requirement
• Storage Conditions: Store in a cool, dry, ventilated area away from strong acids, oxidizers, and heat
• Additional Features: Non-toxic, safe for food use under recommended limits, widely used preservative

 Chemical Name: Polyvinyl Chloride

• Appearance: White or off-white powder or granules
• Odor: Slight chlorine odor
• Density: 1.3–1.45 g/cm³ (depending on grade)
• Bulk Density: 0.35–0.65 g/cm³
• Moisture Content: ≤ 0.3%
• Average Particle Size: 100–200 μm (varies by grade)
• Viscosity (K-value or Fikentscher): 65–75 (for general-purpose PVC)
• Thermal Stability: Decomposes above 200 °C

Purity / Grade Specifications:

• PVC Content: ≥ 99%

Grades & Types:

• General Purpose PVC (GPVC) – Injection molding, extrusion
• Suspension PVC (S-PVC) – Pipes, profiles, sheets
• Emulsion PVC (E-PVC) – Coatings, adhesives
• High Molecular Weight PVC – Specialized applications

Packaging:

• 25 kg, 50 kg bags
• Jumbo bags (500–1,000 kg)
• Bulk in silos (for industrial orders)

Applications:

• Pipes and fittings
• Profiles and window frames
• Flooring and sheets
• Cable insulation and wires
• Packaging films
• Construction materials

Safety Information:

• Non-toxic in solid form
• Avoid inhalation of dust
• Store in a cool, dry place, away from sunlight and heat sources

Chemical Name: Methanol

Physical Properties:

• Appearance: Colorless, volatile liquid
• Odor: Characteristic alcohol odor
• Density: 0.7918 g/cm³ at 20 °C
• Boiling Point: 64.7 °C
• Melting Point: -97.6 °C
• Flash Point: 11 °C (closed cup)
• Autoignition Temperature: 464 °C
• Solubility: Miscible with water and most polar organic solvents
• Vapor Pressure: 12.3 kPa at 20 °C

Purity / Grade Specifications:

• Purity (CH₃OH): ≥ 99.85% (industrial grade)
• Water Content: ≤ 0.3%
• Methanol Assay (GC): ≥ 99.85%
• Acidity (as CH₃COOH): ≤ 0.005%
• Color (APHA): ≤ 10
• Non-volatile Residue: ≤ 0.001%
• Heavy Metals (as Pb): ≤ 5 ppm

Packaging:

• 30 kg, 220 kg HDPE or steel drums
• ISO tanks for bulk shipment

Applications:

• Solvent for paints, resins, and inks
• Chemical feedstock for formaldehyde, acetic acid, and MTBE
• Fuel and fuel additive (bio-methanol)
• Antifreeze and windshield washer fluids

Safety Information:

• Highly flammable and toxic if ingested
• Causes blindness or death if swallowed
• Avoid inhalation and contact with skin/eyes
• Store in a cool, well-ventilated area away from heat, sparks, or flames

Chemical Name: Ethanol
Chemical Formula: C₂H₅OH
CAS Number: 64-17-5
Molecular Weight: 46.07 g/mol

Physical Properties:

• Appearance: Colorless, clear liquid
• Odor: Characteristic alcoholic odor
• Density: 0.789 g/cm³ at 20 °C
• Boiling Point: 78.37 °C
• Melting Point: -114.1 °C
• Flash Point: 12 °C (closed cup)
• Solubility: Miscible with water and most organic solvents
• Vapor Pressure: 5.95 kPa at 20 °C

Purity / Grade Specifications:

• Purity (Ethanol): ≥ 99.5% (anhydrous / absolute ethanol)
• Water Content: ≤ 0.5% (for absolute ethanol)
• Denaturants (if denatured ethanol): As per specification
• Acidity (as acetic acid): ≤ 0.005%
• Color (APHA): ≤ 10
• Non-volatile Residue: ≤ 0.001%
• Methanol Content (if any): ≤ 0.1%

Packaging:

• 25 kg, 200 kg HDPE or steel drums
• ISO tanks for bulk supply

Applications:

• Solvent in pharmaceuticals, cosmetics, and chemical industries
• Raw material for alcoholic beverages (beverage-grade ethanol)
• Fuel additive and bioethanol
• Disinfectant and antiseptic

Safety Information:

• Highly flammable liquid
• Avoid inhalation, ingestion, and contact with eyes or skin
• Store in a cool, dry, well-ventilated area away from ignition sources

 Product Name: Gum Damar (Dammar Gum)
Botanical Source: Shorea spp. and related Dipterocarpaceae family trees
Appearance: Transparent to semi-transparent, pale yellow to brown brittle resin
Odor: Mild, characteristic resinous aroma
Form: Flakes, tears, or lumps

Physical & Chemical Properties:

• Purity: ≥ 98% natural resin
• Solubility: Soluble in alcohol (ethanol), turpentine, and other organic solvents; insoluble in water
• Ash Content: ≤ 1.0%
• Moisture Content: ≤ 1%
• Acid Value: 2–8 mg KOH/g
• Softening Point: 70–120 °C (depends on source)
• Color (Appearance): Pale yellow to brown, clear to translucent

Packaging:

• 25 kg, 50 kg bags (flakes or lumps)
• Bulk packaging in jute or kraft bags

Applications:

• Natural varnishes and lacquers
• Paints and coatings
• Incense and traditional crafts
• Adhesives and binders in artistic mediums
• Food glazing agent (if food-grade)

Safety Information:

• Non-toxic, but dust may cause mild irritation
• Keep away from direct flame; combustible in powdered form
• Store in a cool, dry place, away from moisture and sunlight

Product Name: Microcrystalline Wax / Ceresin Wax

Physical Properties:

• Appearance: White to light yellow solid
• Form: Slabs, blocks, flakes, or granules
• Density (at 20 °C): 0.88 – 0.94 g/cm³
• Melting Point: 60 – 95 °C (grade dependent)
• Oil Content: ≤ 3%
• Viscosity (at 100 °C): 10 – 30 cSt

Chemical Characteristics:

• Hydrocarbon Content: ≥ 99%
• Sulfur Content: ≤ 0.05%
• Ash Content: ≤ 0.01%
• Color (Saybolt): +20 min

Packaging:

• 25 kg cartons or bags
• 500–1,000 kg jumbo bags or pallets

Applications:

• Candle manufacturing
• Rubber and tire industry
• Cosmetics and personal care products
• Polishes, coatings, and adhesives
• Paper coating and packaging
• Electrical insulation compounds

Safety & Storage:

• Non-hazardous under normal conditions
• Combustible; keep away from open flame
• Store in a cool, dry place away from direct sunlight

Product Name: Polyurethane Foam (PU Foam)

Physical Properties

Density:

• Flexible Foam: 18 – 40 kg/m³
• Rigid Foam: 30 – 60 kg/m³

Cell Structure:

• Flexible Foam: Open cell
• Rigid Foam: Closed cell

Hardness (ILD / IFD):

• Flexible Foam: 80 – 250 N (depending on grade)

Chemical Properties

Flame Retardancy:

• Standard grade or Flame-retardant grade (FR) available

Packaging

• Sheets, rolls, blocks, or custom-cut sizes
• Compressed or wrapped in PE film
• Palletized for bulk shipment

Applications

• Furniture and mattress manufacturing
• Thermal insulation (buildings, cold storage)
• Automotive seating and interiors
• Packaging and cushioning
• Soundproofing and vibration control

Safety & Storage

• Non-toxic after curing
• Combustible material
• Store in a cool, dry place away from direct heat and open flames

Product Name: Purified Terephthalic Acid
Molecular Weight: 166.13 g/mol
CAS Number: 100-21-0
HS Code: 291736

Physical Properties

• Appearance: White crystalline powder
• Odor: Odorless
• Melting Point: > 300 °C (sublimes/decomposes)

Typical Chemical Specifications

• Purity (PTA): ≥ 99.8%
• Ash Content: ≤ 0.02%
• Color (APHA): ≤ 10

Packaging

• 25 kg bags
• 500 kg / 1,000 kg jumbo bags

Applications

• PET resin production (bottles, films, fibers)
• Polyester fibers and yarns
• Polyester films and sheets
• Engineering plastics

Safety & Storage

• Dust may cause mild respiratory irritation
• Store in a cool, dry, well-ventilated area

PVC Resin SG-5 Specifications

Product Name: Polyvinyl Chloride Resin SG-5
Type: Suspension PVC Resin
CAS Number: 9002-86-2
HS Code: 390410

Physical Properties

• Appearance: White powder
• Odor: Odorless

Chemical Specifications

• Purity (PVC Content): ≥ 99.5%
• Ash Content: ≤ 0.30%
• Whiteness: ≥ 80%

Packaging

• 25 kg PP paper bags with PE inner liner
• Jumbo bags: 500 kg / 1,000 kg

Applications

• PVC pipes and fittings
• Window profiles and door frames
• Rigid PVC sheets
• Cable conduits
• Injection molding products

Storage & Safety

• Non-hazardous under normal handling
• Avoid inhalation of dust
• Store in a cool, dry place away from heat and direct sunlight.

Sodium Lauryl Ether Sulfate (SLES) Specifications

Product Name: Sodium Lauryl Ether Sulfate
Abbreviation: SLES
Chemical Formula: RO(CH₂CH₂O)ₙSO₃Na
CAS Number: 68585-34-2
HS Code: 340211

Physical Properties

• Appearance: Colorless to pale yellow viscous liquid or paste

Packaging

• 170 kg / 200 kg HDPE drums
• Bulk supply on request

Applications

• Shampoos and personal care products
• Liquid detergents and dishwashing liquids
• Household and industrial cleaners
• Emulsifier and foaming agent

Storage & Safety

• Non-flammable
• Avoid prolonged contact with eyes and skin
• Store in a cool, dry, well-ventilated area
• Protect from direct sunlight and freezing

Product Name: White Petroleum Jelly

Chemical Formula: Cu₂O

CAS Number: 1317-39-1

Molecular Weight: 143.09 g/mol

Physical Properties

• Appearance: White or off-white semi-solid mass
• Odor: Odorless or nearly odorless
• Texture: Smooth, homogeneous
• Melting Point: 38 – 60 °C

Chemical & Quality Specifications

• Purity: ≥ 99%
• Sulfur Content: ≤ 0.05%
• Ash Content: ≤ 0.01%

Packaging

• 25 kg, 50 kg fiber drums or cartons
• Bulk supply on request

Applications

• Pharmaceutical ointments and creams
• Skin protection and moisturizers
• Lubrication and corrosion protection
• Polishes and industrial formulations

Safety & Storage

• Non-toxic and non-hazardous
• Avoid contamination during handling
• Store in a cool, dry place away from direct sunlight

Chemical Name: Copper(II) Oxide

Chemical Formula: CuO
CAS Number: 1317-38-0
Molecular Weight: 79.55 g/mol

Physical Properties

• Appearance: Black powder
• Odor: Odorless
• Bulk Density: 1.3 – 1.6 g/cm³
• Melting Point: ~1,326 °C (decomposes)
• Solubility: Insoluble in water; soluble in acids

Chemical Specifications

• CuO Content: ≥ 98%
• Moisture Content: ≤ 0.5%
• Loss on Ignition: ≤ 1.0%
• Chloride (Cl⁻): ≤ 0.05%
• Sulfate (SO₄²⁻): ≤ 0.05%
• Iron (Fe): ≤ 0.05%
• Heavy Metals (as Pb): ≤ 20 ppm

Applications

• Ceramics and glass coloring
• Pigments and coatings
• Chemical catalysts
• Battery and electronics industry

•  • Animal feed & agricultural micronutrient (specific grades)

Chemical Name: Sodium Bromide

Chemical Formula: NaBr
CAS Number: 7647-15-6
Molecular Weight: 102.89 g/mol

Physical Properties

• Appearance: White crystalline powder or granules
• Odor: Odorless
• Density: 3.21 g/cm³
• Melting Point: 747 °C
• Solubility: Very soluble in water (highly hygroscopic)

Packaging

• 25 kg / 50 kg HDPE bags
• Bulk supply available

Applications

• Oil & gas drilling and completion fluids
• Pharmaceuticals and medical formulations
• Water treatment chemicals
• Photography and chemical synthesis
• Flame retardants and dyes

Storage & Safety

• Store in a cool, dry, well-ventilated area
• Protect from moisture and direct sunlight

Chemical Name: Potassium Sulfite

Chemical Formula: K₂SO₃

CAS Number: 10117-38-1

Molecular Weight: 158.26 g/mol

Appearance: White crystalline powder or granules

Odor: Slight sulfur dioxide odor

Purity (K₂SO₃): ≥ 97%

Solubility: Soluble in water; insoluble in alcohol

Moisture Content: ≤ 1.0%

pH (10% solution): 9.0 – 11.0

Additional Technical Details (Optional)

• Density: ~2.8 g/cm³
• Melting Point: Decomposes > 500 °C
• Sulfate (SO₄²⁻): ≤ 1.0%
• Chloride (Cl⁻): ≤ 0.05%
• Heavy Metals (as Pb): ≤ 10 ppm

Packaging

• 25 kg bags
• Jumbo bags (500–1,000 kg)

Applications

• Food preservative and antioxidant (regulated use)
• Water treatment
• Photography and chemical processing
• Textile and pulp & paper industries

Chemical Name: Potassium Dihydrogen Phosphate

Chemical Formula: KH₂PO₄

CAS Number: 7778-77-0

Molecular Weight: 136.09 g/mol

Appearance: White crystalline powder or granules

Purity (KH₂PO₄): ≥ 99.0%

Solubility: Freely soluble in water; insoluble in alcohol

Moisture Content: ≤ 0.5%

pH (1% solution): 4.3 – 4.7

Loss on Drying: ≤ 0.5%

Additional Technical Details (Optional)

• Bulk Density: 0.9 – 1.1 g/cm³
• Chloride (Cl⁻): ≤ 0.01%
• Sulfate (SO₄²⁻): ≤ 0.02%
• Heavy Metals (as Pb): ≤ 10 ppm

Packaging

• 25 kg bags
• Jumbo bags (500–1,000 kg)

Applications

• Water-soluble fertilizer (MKP)
• Food additive (E340)
• Buffer solutions
• Pharmaceutical formulations

Chemical Name: Magnesium Silicate

Chemical Formula: MgSiO₃ (may contain variable water of crystallization)

CAS Number: 14807-96-6

Molecular Weight: ~100.39 g/mol (anhydrous MgSiO₃)

Appearance: White to off-white powder

Purity (MgSiO₃): ≥ 98%

Moisture Content: ≤ 2%

pH (5% aqueous suspension): 9 – 10

Loss on Ignition: ≤ 5%

Particle Size (Mesh): 200 – 325 mesh (typical for fine powder)

Additional Technical Details

• Bulk Density: 0.8 – 1.1 g/cm³
• Specific Gravity: 2.7 – 2.9 g/cm³
• Heavy Metals (as Pb): ≤ 10 ppm
• Color (Visual): White / pale cream

Packaging

• 25 kg / 50 kg bags
• Jumbo bags (500–1,000 kg)

Applications

• Pharmaceuticals (antacids, fillers, tablets)
• Cosmetics (powders, creams)
• Paints and coatings (extender and matting agent)
• Rubber and plastics (filler)
• Ceramics and refractory materials

Chemical Name: Magnesium Chloride

Chemical Formula: MgCl₂·6H₂O (hexahydrate)

CAS Number: 7791-18-6

Molecular Weight: 203.3 g/mol (hexahydrate)

Appearance: White crystalline flakes or granules

Purity (MgCl₂): ≥ 97% (anhydrous basis)

Moisture Content: ≤ 1 – 3%

pH (5% aqueous solution): 6.5 – 8.0

Solubility: Highly soluble in water; insoluble in ethanol

Additional Technical Details

• Bulk Density: 0.9 – 1.2 g/cm³
• Heavy Metals (as Pb): ≤ 10 ppm
• Sodium (Na): ≤ 1%
• Chloride (Cl⁻): ≥ 60%
• Color (Appearance): White

Packaging

• 25 kg, 50 kg bags
• Jumbo bags: 500 – 1,000 kg
• Bulk shipment in tanks (for liquid MgCl₂ solutions)

Applications

• De-icing and dust control on roads
• Industrial and chemical feedstock
• Pharmaceuticals and supplements
• Water treatment and brine preparation
• Textile and paper industries

Chemical Name: Copper(II) Sulphate Pentahydrate

Chemical Formula: CuSO₄·5H₂O
CAS Number: 7758-99-8
Molecular Weight: 249.68 g/mol

Physical Properties

• Appearance: Blue crystalline solid
• Odor: Odorless
• Crystal Form: Pentahydrate crystals

Packaging

• 25 kg / 50 kg bags
• Jumbo bags: 500 – 1,000 kg
• Bulk shipment for industrial applications

Applications

• Agriculture: fungicide, pesticide, and micronutrient fertilizer
• Electroplating and metal processing
• Laboratory reagent
• Animal feed supplement
• Dye and pigment production

Storage & Safety

• Store in a cool, dry, well-ventilated area
• Avoid inhalation of dust and contact with eyes or skin
• Keep away from moisture and incompatible substances

Chemical Name: Zinc Phosphate

Chemical Formula: Zn₃(PO₄)₂
CAS Number: 7779-90-0

Molecular Weight: 386.11 g/mol

Physical Properties

• Appearance: White to off-white crystalline powder
• Odor: Odorless
• Solubility: Insoluble in water; soluble in acids

Chemical Specifications

• Zinc Phosphate Content ≥ 98%
• Zinc Content (Zn): 30 – 31%
• Moisture Content: ≤ 0.5%
• Iron (Fe): ≤ 0.05%

Packaging

• 25 kg / 50 kg bags
• Jumbo bags: 500 – 1,000 kg

Applications

• Anti-corrosion primer in paints and coatings
• Additive in ceramics and plastics
• Catalyst or intermediate in chemical reactions

Storage & Safety

• Store in a cool, dry, and ventilated place
• Keep away from acids and moisture
• Avoid inhalation of dust and contact with eyes or skin

Chemical Name: Sulfuric Acid

Chemical Formula: H₂SO₄
CAS Number: 7664-93-9
Molecular Weight: 98.08 g/mol

Physical Properties

• Appearance: Colorless to slightly yellow, oily liquid
• Odor: Odorless
• Density: 1.84 g/cm³ (concentrated, 98%)
• Solubility: Miscible with water (exothermic on dilution)

Chemical Specifications

• Purity (H₂SO₄): ≥ 98% (concentrated grade)
• Iron (Fe): ≤ 0.003%
• Chloride (Cl⁻): ≤ 0.005%
• Arsenic (As): ≤ 3 ppm
• Color (APHA): ≤ 20
• Water Content: ≤ 2% (for concentrated grade)

Packaging

• 35 – 37%: HDPE drums, tanks
• Concentrated 98%: ISO tankers, acid-resistant steel drums
• Bulk shipment in ISO tanks

Applications

• Fertilizer industry (phosphate fertilizers)
• Chemical manufacturing (sulphates, detergents, dyes)
• Petroleum refining and metallurgical processes
• Laboratory and industrial reagents
• Battery electrolyte (diluted grade)

Storage & Safety

• Highly corrosive; causes severe burns
• Avoid contact with skin, eyes, and clothing
• Store in a cool, dry, well-ventilated area
• Keep away from incompatible materials (organic matter, bases, metals)

Chemical Name: Chlorine

Chemical Formula: Cl₂
CAS Number: 7782-50-5
Molecular Weight: 70.90 g/mol

Physical Properties

• Appearance: Greenish-yellow gas
• Odor: Pungent, suffocating chlorine smell
• Density: 3.214 g/L at 0 °C and 1 atm
• Melting Point: -101.5 °C
• Boiling Point: -34.04 °C
• Solubility: Soluble in water (~7 g/100 mL at 0 °C), reacts to form hydrochloric and hypochlorous acids
• Vapor Pressure: 6,500 kPa at 25 °C (liquefied chlorine)

Chemical Specifications

• Purity (Cl₂): ≥ 99.0% (for industrial grade)
• Moisture (H₂O): ≤ 0.5%
• Phosgene (COCl₂): ≤ 1 ppm
• Hydrogen Chloride (HCl): ≤ 0.01%

Packaging

• Gas cylinders (steel cylinders, 50–150 kg)
• Ton containers for bulk transport
• ISO tanks for liquefied chlorine

Applications

• Water disinfection and sanitation
• Bleaching in pulp and paper industry
• Chemical intermediates (PVC, chlorinated compounds)
• Pharmaceuticals and laboratory reagents
• Wastewater treatment

Storage & Safety

• Extremely toxic and corrosive gas
• Avoid inhalation; use proper PPE and gas detectors
• Store in a cool, dry, well-ventilated area away from organic materials and acids
• Cylinders must be upright and secured; avoid heat and direct sunlight

Product Name: ABS Resin

Chemical Name: Acrylonitrile Butadiene Styrene
hemical Formula: (C₈H₈·C₄H₆·C₃H₃N)ₙ
CAS Number: 9003-56-9
 

Physical Properties

• Appearance: White to light yellow opaque granules
• Odor: Mild, characteristic plastic odor
• Melt Flow Index (MFI, 220 °C / 10 kg): 2 – 30 g/10 min (depending on grade)
• Glass Transition Temperature (Tg): 105 °C
• Thermal Stability: ≥ 260 °C (processing range)
• Moisture Content: ≤ 0.2%

Mechanical & Chemical Properties

• Tensile Strength: 40 – 50 MPa
• Impact Strength (Izod, notched): 15 – 25 kJ/m²
• Flexural Modulus: 1800 – 2200 MPa
• Hardness (Rockwell R): 100 – 110
• Color: Natural (white/off-white) or color masterbatch available

Packaging

• 25 kg / 50 kg bags
• Custom packaging for bulk industrial orders

Applications

• Automotive parts and dashboards
• Electrical housings and appliances
• Toys and consumer products
• Pipes, sheets, and profiles
• 3D printing filaments

Storage & Safety

• Store in a cool, dry, ventilated area
• Avoid direct sunlight and moisture
• Non-toxic, but avoid inhaling dust from pellets or powder
• Keep away from high heat sources to prevent degradation

Chemical Name: Ammonium Chloride

Chemical Formula: NH₄Cl
CAS Number: 12125-02-9
Molecular Weight: 53.49 g/mol

Physical Properties

• Appearance: White crystalline powder or granules
• Odor: Slight ammoniacal odor
• Density: 1.527 g/cm³ (solid)
• Melting Point: 338 °C (sublimes)
• Solubility: Soluble in water (37.2 g/100 mL at 20 °C), slightly soluble in ethanol

Chemical Specifications

• Purity (NH₄Cl): ≥ 99%
• Moisture Content: ≤ 0.5%
• pH (10% solution): 4.3 – 6.0
• Water Insoluble Matter: ≤ 0.05%
• Iron (Fe): ≤ 0.01%
• Heavy Metals (as Pb): ≤ 10 ppm
• Color: White

Packaging

• 25 kg / 50 kg bags
• Bulk shipment available

Applications

• Fertilizers (nitrogen source)
• Electrolyte in dry cells
• Metal and electroplating industry
• Pharmaceuticals (cough medicine, expectorant)
• Food additive (leavening agent in some countries)

Storage & Safety

• Store in a cool, dry, well-ventilated area
• Keep away from moisture and incompatible chemicals (strong acids, bases)
• Avoid inhalation of dust

Chemical Name: Chromium(III) Sulfate

Chemical Formula: Cr₂(SO₄)₃·xH₂O (commonly 12–18 H₂O)
CAS Number: 10101-59-0
Molecular Weight: 392.18 g/mol (anhydrous)

Physical Properties

• Appearance: Dark green crystalline solid or powder
• Odor: Odorless
• Solubility: Soluble in water; insoluble in alcohol
• Density: 2.0 – 2.2 g/cm³
• pH (10% aqueous solution): 2 – 4

Chemical Specifications

• Cr₂O₃ Content: 16 – 18% (for leather tanning grade)
• Cr³⁺ Content: 15 – 16%
• Moisture Content: 10 – 20%
• Sulfate (SO₄²⁻): 36 – 40%
• Iron (Fe): ≤ 0.05%

Packaging

• 25 kg / 50 kg bags
• Jumbo bags: 500 – 1,000 kg
• Bulk shipment available

Applications

• Leather tanning (primary use)
• Pigment production
• Chemical intermediate for chromium salts
• Catalysts and metal surface treatment

Storage & Safety

• Store in a cool, dry, ventilated area
• Keep away from acids and incompatible chemicals
• Avoid inhalation of dust and contact with skin/eyes
• Toxic if ingested; handle with proper PPE

Chemical Name: Dicopper Pyrophosphate

Chemical Formula: Cu₂P₂O₇
CAS Number: 13598-36-0
Molecular Weight: 221.58 g/mol

Physical Properties

• Appearance: Blue-green crystalline powder
• Odor: Odorless
• Density: ~3.3 g/cm³
• Solubility: Insoluble in water; soluble in mineral acids
• pH (5% suspension): 5 – 7

Chemical Specifications

• Cu₂P₂O₇ Content: ≥ 98%
• Copper (Cu) Content: 54 – 55%
• Phosphorus (P₂O₅) Content: 39 – 40%
• Moisture Content: ≤ 1%
• Water Insoluble Matter: ≤ 0.5%
• Color: Blue-green

Packaging

• 25 kg / 50 kg bags
• Customized packaging available

Applications

• Flame retardant coatings and additives
• Ceramic and pigment industry
• Electroplating and specialty chemical processes
• Catalyst and battery materials

Storage & Safety

• Store in a cool, dry, well-ventilated area
• Avoid inhalation of dust and contact with skin/eyes
• Keep away from strong reducing agents and acids
• Non-flammable, but handle with standard chemical PPE

Product Name: Sulphur Black

Chemical Class: Sulphur Dye
CAS Number: 1326-82-1 (typical range, depends on grade)

Physical Properties

• Appearance: Black powder or granular
• Odor: Mild sulphur odor
• Solubility: Insoluble in water; soluble in hot alkaline solution
• pH (1% solution in hot water): 9 – 11
• Moisture Content: ≤ 8%

Packaging

• 25 kg bags
• Jumbo bags: 500 – 1,000 kg
• Custom packaging for export available

Applications

• Dyeing cotton, viscose, and other cellulose fibers
• Printing inks for textiles
• Leather dyeing (specialty grade)
• Industrial textile finishing

Storage & Safety

• Store in a cool, dry, ventilated area
• Avoid moisture and direct sunlight
• Handle with gloves and dust mask
• Non-flammable, but avoid inhalation of fine dust

HDPE Granules Specifications

Product Name: HDPE Granules
Chemical Name: High-Density Polyethylene
Chemical Formula: (C₂H₄)ₙ
CAS Number: 9002-88-4
Physical Properties

• Appearance: Natural white / translucent granules
• Odor: Odorless
• Melt Flow Index (MFI, 190 °C / 2.16 kg): 0.2 – 2.5 g/10 min
• Melting Point: 125 – 135 °C
• Moisture Content: ≤ 0.03%
• Bulk Density: 0.35 – 0.50 g/cm³

Packaging

• 25 kg, 50 kg bags
• Bulk shipment in containers

Applications

• Plastic bottles, containers, and packaging films
• Pipes, fittings, and sheets
• Household items and industrial components
• Toys and automotive parts

Storage & Safety

• Store in a cool, dry, ventilated area
• Keep away from direct sunlight and heat sources
• Non-toxic, non-flammable, but avoid dust inhalation during handling

Paraffin Wax Specifications

Product Name: Paraffin Wax
Chemical Type: Saturated Hydrocarbon (Alkanes, C₂₀–C₄₀)
CAS Number: 8002-74-2
HS Code: 2712

Physical Properties

• Appearance: White to pale yellow solid
• Odor: Odorless or faint hydrocarbon smell
• Melting Point: 50 – 70 °C (varies by grade)
• Density (at 20 °C): 0.86 – 0.90 g/cm³

Packaging

• 25 kg, 50 kg cartons or bags
• 500–1,000 kg jumbo bags or pallets

Applications

• Candle manufacturing
• Cosmetics (creams, ointments, lip balms)
• Wax coatings for food and packaging

Storage & Safety

• Non-toxic under normal use
• Combustible: keep away from open flames
• Store in a cool, dry, ventilated area
• Avoid direct sunlight and moisture